How to flash stock rom on micromax a110(jellybean v1,v1.11,ics v1.v2)

FLASHING ROM

Now with all Custom ROM's,its important to know how to flash a phone through PC..

It Comes in handy when a device gets a bootloop and also when its bricked....So follow this Tutorial and Flash your Phones Successfully

Before Proceeding download this file..

Quote:

STOCK ROM+Drivers+SP Tool+Guide: HERE Thanks to "Vijeta Verma" for the Upload SP tool link[updated]: HERE Drivers VCOM[updated]: HERE JellyBean Official ROM :HERE Thanks to SheshuVadrevu

Ok Lets Start..

1)Install Drivers.

2)Open SP tool


3)Select 'Android Scatter file' inside ROM folder.



4)Now Shut_Down Canvas 2.

5)Click Firmware_Upgrade Button.



6)Connect Phone{Switched off} to PC via USB Cable.

7)If everythings right,Flashing will proceed..

8)Wait till It finishes..A green ring is displayed on completion..

9)Now Close SP tool..Remove Phone from PC..

10)Switch ON the phone...It is successfully Flashed...


FLASHING PATCHES

1)Select Android Scatter File .txt ....

2)Uncheck all files from the below box....

3)Select the correct file you want Flash by clicking it....

4)Click Download button on SP tool.... **"Dont click Firmware Upgrade"

5)A box asks to confirm it...Click Yes...

6)Connect Phone in Switch off State...

7)It will get Flashed...
 


Note:I am not responsible for Mistakes and Bricked Devices...And dont flash ROM that arent made for A110 unless confirmed by others...